Wine/Black Striped Two Tone Zebra Blind

Wine/Black Striped Two Tone Zebra Blind
Views: 2624 Product Code: SPHSO158.08
Availability: 9
1 Product(s) Sold
£22.44 Ex Tax: £18.70

Available Options


* Control Position:



* Fitting Option:



Total Price:
Qty: Add to Cart

 

 

See our detailed measuring guide for full instructions on how to measure for your window blinds.

 

Fitting Roller Blinds and Zebra Blinds

 

During the ordering process as we were asked for the control position (right, left) and fitting options (exact, recess) we will have positioned the controls and prepare the blind accordingly.

The brackets that are supplied with your blind enable you to face-fix the blind onto a wall/window frame, or top-fix the blind onto the ceiling/underside of a recess. As our Roller Blinds also comes with an Head Rail as an advantage compared to the cheap blinds in the market it is very easy to mount with only a clip to hold it in place.

             

Head Rail for the Roller Mechanism                     Angle Brackets for Face Fix and different angles

 

 

Top Fix Clip                                                                        Cassette Fixing with Angle Brackets above

 

Face Fix & Top Fix

Top Fix (to the window frame)            

If you have a sound substrate to fit your blinds to the top of your window recess this does provide a neat installation where the blind is situated with minimal risk of damage in a normal situation.

  • Measure and mark the distance allowing for obstructions like handles that protrude into the recess area.
  • To calculate the spacing between the brackets, add 35mm (13/8”) to the width of the blind fabric. Hold each bracket into place and mark the hole positions. Fix the brackets so that the outsides of the brackets are this distance apart. Fit each bracket using the screws provided.
  • Brackets must be level to ensure the smooth operation of the blind.
  • Check that the rolled up fabric will not touch any surface.
  • Please ensure fixings are suitable for the wall/surface to which you are mounting the brackets.
  • Hold the blind to the brackets with the fabric hanging from the back of the blind.
  • First locate the ‘pin’ (the end of the blind opposite to the controls) into the bracket, then fix the control end into the opposite bracket. Push the blind into the bracket, depressing the plunger.
  • Allow the hook to drop downwards so that it locks into place in the bracket.

Face Fix (outside of the reveal)

You may need to face fix to get a better substrate or to avoid opening windows, handles or other obstructions. This can be done as below.

  • Hold each bracket into place and mark the hole positions.
  • To calculate the spacing between the brackets, add 35mm (13/8”) to the width of the blind fabric. Fix the brackets so that the outsides of the brackets are this distance apart. Fit each bracket using the screws provided.
  • Brackets must be level to ensure the smooth operation of the blind.
  • Check that the rolled up fabric will not touch any surface.
  • Please ensure fixings are suitable for the wall/surface to which you are mounting the brackets.
  • Hold the blind to the brackets with the fabric hanging from the back of the blind.
  • First locate the ‘pin’ (the end of the blind opposite to the controls) into the bracket, then fix the control end into the opposite bracket. Push the blind into the bracket, depressing the plunger.
  • Allow the hook to drop downwards so that it locks into place in the bracket.

 

Child Safety Device Installation

  • Children can be strangled if a safety device is not installed. Always use a safety device to keep cords or chains out of reach of children.
  • The cord retaining device must be installed at the maximum distance possible from the control mechanism to prevent looped cord(s) becoming slack.
  • Place retaining device on the wall and mark the position of the hole using a pencil. Drill holes using a suitable drill bit. Place device into position ensuring the chain is fully taut. Take the retaining device and screw it using suitable fixings ensuring the device is fully closed.

 

 

What do you need to do, Mandatory requirements?
WARNING!

Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck.

·         Move beds, cots, highchairs and playpens away from window covering cords and chains.

·         Make sure all cords and chains are always secured out of reach of babies and young children. Do not tie cords or chains together. Make sure cords or chains do not twist and create a loop

·         Move furniture away from window covering cords and chains as children love to climb.

 

 

 

 

 

Blinds 4 Value takes Child Safety extremely seriously and fully supports the Make It Safe campaign promoted by BBSA, The British Blind & Shutter Association. 
Please read all instructions written at Fitting Instructions section as well as the warning labels provided with your Blind.
All our blinds have been fully tested and comply with the BBSA’s Child Safety guidelines and meets the regulations outlined in British and European safety standard EN13120:2009 + A1:2014.
According to the safety standards our Blinds comes with below specifications and accessories:

  • Standard Chain Cord – 100 cm maximum cord drop.
  • P’ Clip Control Tidy (make sure following the installation guideline when installing P’ Clip.)

1                                                     2

Please visit the link to receive further information on Child Safety from BBSA. http://makeitsafe.org.uk/

Child Safety Device Installation

  • Children can be strangled if a safety device is not installed. Always use a safety device to keep cords or chains out of reach of children.
  • The cord retaining device must be installed at the maximum distance possible from the control mechanism to prevent looped cord(s) becoming slack.
  • Place retaining device on the wall and mark the position of the hole using a pencil. Drill holes using a suitable drill bit. Place device into position ensuring the chain is fully taut. Take the retaining device and screw it using suitable fixings ensuring the device is fully closed.

34

What do you need to do, Mandatory requirements?
WARNING!
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck.

  • Move beds, cots, highchairs and playpens away from window covering cords and chains.
  • Make sure all cords and chains are always secured out of reach of babies and young children. Do not tie cords or chains together. Make sure cords or chains do not twist and create a loop
  • Move furniture away from window covering cords and chains as children love to climb.

 

5

 

 

We, at Blinds 4 Value, believe our production is the best quality possible and, with that confidence, we offer our customers a staggering 3 year guarantee on all purchases from our Made to Measure Blinds and Curtains.

 

We endeavour to make sure we combine quality with great value in all of our product lines. Select the perfect blinds and curtains for your homes and offices with confidence and join our happy customers. 

 

Wine/Black Striped Two Tone Zebra Blind

 

Wine/Black Lined Two Tone Zebra Blind gives you the best of both worlds with two different colours that would decorate your home and windows.

Strappy look of these day and night blinds in general and added small stripes on the opaque part of this Blind makes it so unique and look more classy and chic. Together with woven effect of Wine and Black yarns, this blind looks very natural and gives you all the positive feelings.

 

Oeko-Tex Certificate

Made of top quality certified materials. Learn more about our Product Quality.

Aluminium Roller Tube
Cassette 38mm Mechanism
Brackets
Fitting
Fabric
1%100 Polyester
3• Opaque Stripes 7.5 cm, Sheer Stripes 5.5 cm
4• Two sliding layers of fabric with alternating sheer and solid stripes
5• Our fabric widths are greater than 3000 mm therefore we do not use any stitch or weld to join the fabrics in the middle for any widths or lengths available at store. Be careful when buying as other brands usually use this technique and these welded or stitched parts will fall apart in time with use and it will not look decorative.
Details
Colour• Red, Black
Style• Two Tone • Striped • Day and Night
• Made to measure
• Maximum width 2800mm, maximum drop 3200mm
• Minimum width 300mm, minimum drop 300mm
• Aluminium, strong rust free, roller tube and white closed cassette head rail without any extra charge. Cheap brands will give open cassette and extra charge for closed cassette.
• Side control unit and plastic ball chain to raise and lower the blind
• Easy fit universal brackets
• Suitable for all rooms. Consider your decoration concept, colours used while choosing your blinds.
• The bottom finish of the blind will be a straight finish.
• To allow for the brackets and operating mechanism actual width of the fabric will be approximately 35mm less than the overall blind width ordered.
NoticePlease Note the pictures provided are a close match to the actual Fabric Material and its colors; however due to the different computer monitors/calibrations, colors may vary slightly from the picture shown on your screen to the actual Fabric/Product.
Opacity
• Dim Out
• Light Filtering
Shipping Methods
• Next Day Service (24 Hour Dispatch)
• Fast Track Dispatch (3 Working Days)
• Standard Shipping (5 to 7 Working Days)
There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: